Home > events > company news

Wtau crane safety monitoring system for the world's largest piling vessel "Sanhang Pile 20".
2020-06-29 10:45:45

Recently, the load moment indicator system independently developed and produced by Weite Technologies Co., Ltd. has been successfully applied to the world's largest piling vessel "Sanhang Pile 20". The installation and commissioning have been completed, it has been approved by the customer and got good reputation from the customer.

Piling boat-1.jpg 

On the morning of May 8, 2020, the 130M piling vessel "Sanhangzhuang 20" built by China Merchants Heavy Industry (Shenzhen) Co., Ltd. for China Communications Third Aviation Bureau held a delivery ceremony at the China Merchants Industry Shenzhen Marzhou Island Base, marking The world's largest piling ship is officially born. Yin Jianbing, deputy general manager of CCCC Third Aviation Bureau, Luo Maocai, general manager of China Classification Society Shenzhen Branch, Wang Yangzhi, general manager of China Merchants Heavy Industry (Shenzhen) Co., Ltd. and related persons attended the delivery ceremony.

Piling boat-2.jpg

Designed by Shanghai Jiahao Chuanhai Engineering Research and Design Co., Ltd., Sanhangzhuang No. 20 was started on Mar. 18, 2018. It has a length of 108 meters, a width of 38 meters, and a depth of 7.2 meters. Equipped with 2 sets of 1760kW driving hydraulic oil pump sets, equipped with 2 sets of 450 tons main lifting pile trolley sets and 1 set of 300 tons auxiliary lifting pile trolley sets, the pile frame height is 128 meters, and the pile driving operation can adapt to the maximum pile diameter of 5 meters. The operating capacity of the maximum pile weight is 450 tons, and the GPS positioning system and the four-corner draft system with an accuracy of centimeter level are set to accurately position the pile driving.

pilling boat-3.jpg

The lifting capacity of the main hook is 450 tons, the height of the pile frame is 133 meters, and the maximum lifting capacity of the pile frame is 700 tons. It can adapt to all offshore areas and 50 meters underwater. It can meet the construction requirements of pile length 105m+ water depth and diameter Φ5000mm,which is the largest and highest piling ship in the world.


The ship adopts a mature hydraulic drive method to provide power source for the three main systems of the ship-the ship winch operating system, the pile crane operating system and the luffing system. The pile driving hammer adopts the most advanced and independent hydraulic system IHC-S800 hydraulic hammer currently on the market, and the whole ship cooling system adopts a non-seawater direct contact internal circulation method.

On the basis of many years of experience in the use of piling ships on the actual ship, CCCC III has optimized the layout, system and equipment configuration of the ship together with the design unit, which truly reflects the advanced concept of energy conservation and environmental protection. With the joint efforts of CCCC, China Classification Society and China Merchants Heavy Industry (Shenzhen) Co., Ltd., the project team has carefully designed and scientifically organized to overcome the epidemic situation that has caused the project production, equipment transportation and commissioning. Great impact, successfully shortened the half-year construction cycle and delivered in advance.


The successful delivery of the project will add new outstanding achievement to the offshore construction equipment of China Communications and Sanhang Bureau, which will greatly enhance the right to speak in the field of offshore construction including offshore wind power, and further demonstrate the strength of the Sanhang brand. It will add another great weapon for my country's marine resource development and offshore engineering projects.

Since Sanhang Pile 20 is the largest newly built pile vessel in the world, the relevant installation and commissioning regulations are strictly controlled, and the technical requirements are high. On-site installers must climb the top of the 130-meter pile ship’s boom and install the weight sensor and hook limit, it is very difficult to install.


During the installation and commissioning process, Weite technical engineer always take customer satisfaction as the first purpose, negotiate with the customer to solve various problems encountered on the spot, and modify the application program and the main interface display program for the customer on site according to the actual application situation to overcome all difficulties finally completed installation and commissioning, and won customer satisfaction. At the same time, the project also passed the third-level acceptance of China Communications Third Air, China Merchants Heavy Industry and Youlian Shipyard.


The WTL-A700 load moment indicator system independently developed by Weite Technologies was applied to the "Sanhang Pile 20" 130-meter piling ship and won great reputation by  the China Communications Sanhang, China Merchants Heavy Industry, Youlian Shipyard, China Classification Society &Ship Research Institute .The WTL-A700 crane monitoring  system also provides a reliable safety guarantee for the safe operation of the pile 20.

Contact us

Add.:No.6 Gangcheng Road,Yichang,Free Trade Zone(Hubei) China 443005



Load moment indicator(LMI), crane computer, safe load indicator, Marine CCTV Camera System,Overload limiter,Crane monitoring system,Anemometer, Load cell,Length/angle sensor,A2B Limit switch, Offshore CCTV Camera System,Crane Video Camera System,Crane Safety Management System,Crane Lmi,Crane Rci,Crane Sli, WTL-A700 ,Weite Technologies Co.,Ltd
Site map